The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Jolene

Mr.Chevy4x4 · 12-04-2016, 06:27 PM

Well, I decided to mock up my A/C bracket and fabricate the supports for it rather than dropping it in the truck today. I used an A/C bracket from a 4.3 S10 and made some modifications to it. Got the idea from another thread somewhere, but can't remember where. Anyway, here are some pictures. I'll be able to run an R4 compressor now and use a K5/Suburban hoses. The manifold in the pic is a 2011 camaro take-off that I think I'm going to run.

Mike

12-04-2016, 06:27 PM	#16
Mr.Chevy4x4 Registered User Join Date: Jul 2007 Location: Sims, NC Posts: 531	Re: Jolene - '86 SWB budget 5.3l 4l60e driver build Well, I decided to mock up my A/C bracket and fabricate the supports for it rather than dropping it in the truck today. I used an A/C bracket from a 4.3 S10 and made some modifications to it. Got the idea from another thread somewhere, but can't remember where. Anyway, here are some pictures. I'll be able to run an R4 compressor now and use a K5/Suburban hoses. The manifold in the pic is a 2011 camaro take-off that I think I'm going to run. Mike Attached Images __________________ All things Chevy truck: 1986 SWB "Jolene" boosted 5.3/4l80e project