The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**jayoldschool** · 12-15-2016, 02:42 PM

If you have a mixed group of used sills, it's easy to move the frame pads. Just drill out the spot welds, and weld them back in the correct location. I did this for a couple on my 65 when I replaced all of them.

12-15-2016, 02:42 PM	#4
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,187	Re: Bed sills question If you have a mixed group of used sills, it's easy to move the frame pads. Just drill out the spot welds, and weld them back in the correct location. I did this for a couple on my 65 when I replaced all of them.