If you wanted a PS pump bracket designed like the original ones, the photo below shows the item and contact info.
Anthony Smith 913-207-7789. I will say that Mr Smith (
4-5-6 Chevy Trucks)has made many customers unhappy over the years, so keep that in mind.
I think the one you found on eBay mounts the PS pump in a more forward position which eliminates the need for a double groove alternator pulley. That seems good to me.
I just got back from NAPA. Crazy stuff happens, so here's the story.
I ordered the low pressure return line for my 1974 PS gear box (NAPA part NPS-71202). It's pretty universal so it should connect fine to my 1969 PS Pump.
What I actually got in the box was NAPA part NPS71143 which is actually a high pressure PS line. Well the metal tubing has the wrong bends but the fittings on both ends are correct. Imagine that!
So I will return this PS hose but keep it in mind because I might not be able to find anything better. The metal pipe portion coming down off the pump is very long and looks funny.
Tomorrow if time allows, I will visit a hydraulic hose shop. Over the phone the shop man described a reusable fitting that I might be able to use to combine the fitting from 2 different new hoses. We will see. Feel free to send me a PM. It has been much more difficult to find hoses than I would have imagined.