The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 01-18-2017, 11:52 AM

Yes,

pop the hood first. There should be about 4 phillip head screws under the rubber gasket for the hood holding it in place.

Then 4 more smaller phillip heads at the grille area of the cowl take those out.

Take both wipers off and washer nozzles hose loose.

Then open each door there is a 1/2" head bolt staring at you take them out they are Hortzonal.

There are also 2 that are straight in front of those 2 toward the front of the cowl which are vertical.

That's it you can lift it off but be carefull you will want some one to help you.

01-18-2017, 11:52 AM	#2
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Wiper Cowl Removal Yes, pop the hood first. There should be about 4 phillip head screws under the rubber gasket for the hood holding it in place. Then 4 more smaller phillip heads at the grille area of the cowl take those out. Take both wipers off and washer nozzles hose loose. Then open each door there is a 1/2" head bolt staring at you take them out they are Hortzonal. There are also 2 that are straight in front of those 2 toward the front of the cowl which are vertical. That's it you can lift it off but be carefull you will want some one to help you. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.