The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

rockyrivermark · 01-22-2017, 10:13 PM

I did already search the forum but didn't get the info I'm looking for.
1970 c10
The passenger door sticks out past the cap on the lower latch side. The rest of the door is pretty close. I thought I would loosen the top hinge bolts on the door and push that out a touch but it's maxed out on adjustment.
1. Is this the adjustment I should do?
2. Since the hinge is already at max adjustment should I shim out the top hinge at the fender to achieve the same movement?
Thanks. Mark.

01-22-2017, 10:13 PM	#1
rockyrivermark Registered User Join Date: Apr 2011 Location: Fairview Park, Ohio Posts: 1,031	Quick door alignment question I did already search the forum but didn't get the info I'm looking for. 1970 c10 The passenger door sticks out past the cap on the lower latch side. The rest of the door is pretty close. I thought I would loosen the top hinge bolts on the door and push that out a touch but it's maxed out on adjustment. 1. Is this the adjustment I should do? 2. Since the hinge is already at max adjustment should I shim out the top hinge at the fender to achieve the same movement? Thanks. Mark.