Quote:
Originally Posted by davepl
I disagree, I think you could make one out of a coat hanger with the steps in the manual, but to each their own! The picture below should do it.
Don't forget 2bbl and 4bbl are reversed (one goes up, the other down), so the rods may not interchange, but otherwise it's the same deal.
|
So Dave...you're saying as long as the bottom of rod is all the way down on a cold choke coil spring, and the top of the rod is at the bottom of hole when choke plate is completely closed, that's the length of rod that's needed...measure by that distance to make one.
Plus, my choke coil goes 'up'.