I've not posted any new information in this thread in a while and thought I'd share some new Holley accessory drive options that apply to this application.
Holley has recently released a new accessory drive system that shares the same component configuration as the 4th-gen F-body FEAD. This set-up is capable of being installed at both the F-body and truck offsets with the parts contained in the packaging; installation at the Corvette-offset is not possible.
A very cool feature of this set-up is it allows the user to install the small or large truck type alternators as you can see in the attached photos.
The new Holley low-mount A/C compressor bracket for the Sanden SD7B10 also shown in the photos has the capability of being installed at the Corvette, F-body or truck offsets, depending on the vehicle application and the specific engine swap brackets being used.
For those of you using the Hooker 12612HKR 73-87 GM truck brackets, the A/C compressor bracket can be installed at the F-body and truck offsets without have to cut or modify anything.
The parts shown in the photos were painted black by the vehicle owner and are not available from Holley in that finish; all production components are bare aluminum.[IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG].