View Single Post
Old 02-03-2017, 10:53 AM   #5
randy500
Account Suspended
 
Join Date: Jul 2016
Location: Tacoma, WA
Posts: 6,873
Re: Adjusting neutral safety

Before you do all that, use standard troubleshooting procedures....
1. Key on
2. Check for power at the light socket with test light, no power go to step 3, if power is present, correct ground or bad bulb
3. Check the switch with a test light, one side is always hot and when in reverse power is transferred through the switch to the other terminal which leads to the reverse lights.
randy500 is offline   Reply With Quote