Re: '67-'72 Power Brake Booster Bracket With Hydraulic Clutch Conversion
Quote:
Originally Posted by 67ChevyRedneck
Gotcha!
I'm installing a 2001 4.3L S10 NV3500 in my 67 C10, the trans has the internal slave. I've seen several people us this one: 70174-750? But if that won't work with your pedal, that's OK. I want the best combo that will work. That MC bowl looks tiny... is there enough fluid to push the slave cylinder that I need it to?
|
Quote:
Originally Posted by Captainfab
I was able to find that Wilwood clutch master. The number you gave is an old outdated number. I can supply that master at an additional cost. I will have to check and see where I can get the best price.
|
Quote:
Originally Posted by Captainfab
No I do not have a source for a clutch master with the port on the bottom. With the Wilwood's it is either on the top or front.
|
Ready to finally buy this. The trans I'm using is posted above. I don't need the MC that I posted above if you know of one that works with my application, but I do want it to come out the front, I DO NOT want one that comes out of the top.
I just want the unpainted mount plate for the clutch and the clutch parts like below:
Quote:
Originally Posted by Captainfab
The total cost for one '67-'72 hydraulic clutch conversion with just the base plate and in bare steel with shipping is $191.85.
|
Thanks!
|