The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

oldgoalie · 03-19-2017, 12:50 PM

The 200-4R is longer than the powerglide so you will have to shorten the driveline. The cross member has to go quite away back, the 200-4R rear mount is at the very rear at the trans. The shifter linkage will not work without some mods, there are kits out there that you can get, lokar has one. Cooler line will work. Back up light switch is under the dash on the column, nothing to change there. VERY important to hook up throttle pressure cable correctly, and adjust.
There or also kits for the lock up convertor connection, you need a 12V fused source.

03-19-2017, 12:50 PM	#2
oldgoalie Registered User Join Date: Feb 2012 Location: Wenatchee, Washington Posts: 92	Re: Th2004R swap The 200-4R is longer than the powerglide so you will have to shorten the driveline. The cross member has to go quite away back, the 200-4R rear mount is at the very rear at the trans. The shifter linkage will not work without some mods, there are kits out there that you can get, lokar has one. Cooler line will work. Back up light switch is under the dash on the column, nothing to change there. VERY important to hook up throttle pressure cable correctly, and adjust. There or also kits for the lock up convertor connection, you need a 12V fused source.