Quote:
Originally Posted by ray_mcavoy
283 and 327 with ram's horn manifolds both used the same spark plug wire routing and brackets.
Here is a diagram from the 67-72 assembly manual:
The 1966 spark plug wire routing is nearly identical. The only difference is the style of retainer bracket used at the driver side rear (item #17 on the diagram). |
Got the rear engine wire holders bolted in after removing the wheels and working in the wheel wells under the inner fenders...what a pain that was! So is it fact that a set of 7mm pre 1974 Corvette wires will all be long enough to enable this plug wire routing setup? Or will any good set for a 67-72 283/327 work?