[N2TRUX]

Yesterday morning I started early and finished the @kickeraudio #kmc20 display install. After lots of contemplation I designed a way to mount the dusplay without modifications to the bezel or dash.
Previously I had made a template to cut out a piece of 1/16" textured abs to fill the cavity on the bezel. I attached it with thin double sided tape while I marked and drilled a couple of extra holes in the display mounting tab directly over the original radio holes. I made a small backing plate out of 1/8" abs scrap to attach from the backside.

Once I was comfortable that this would be secure I took it all apart once again and repeated the process on the new bezel supplied by Brothers Truck parts.