The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 67-72 GMC front bumpers the same?

ratty69 · 04-08-2017, 10:46 PM

Sounds like you might have a really craptastic repop. Been there with different parts...

One trick I've used on bent frame/bumper trucks is to get some way longer bolts that are fully threaded and use them to pull the bumper in tight. Then change out those bolts for the originals, one at a time. Use a washer under the head and grease under the washer so you don't mess up the chrome.

Hope it works out.

04-08-2017, 10:46 PM	#4
ratty69 Registered User Join Date: Jun 2016 Location: Vancouver B.C. Posts: 206	Re: 67-72 GMC front bumpers the same? Sounds like you might have a really craptastic repop. Been there with different parts... One trick I've used on bent frame/bumper trucks is to get some way longer bolts that are fully threaded and use them to pull the bumper in tight. Then change out those bolts for the originals, one at a time. Use a washer under the head and grease under the washer so you don't mess up the chrome. Hope it works out.