View Single Post
Old 04-18-2017, 08:11 PM   #2
jayoldschool
Moderator
 
Join Date: Dec 2012
Location: ON, Canada
Posts: 2,187
Re: SBC Rocker arm tick

I had the same problem with my 65 C10. One would clatter. It would go away when properly lashed, but would loosen up. It was solved by a new rocker arm nut, a freebie from my local machine shop. Installed, lashed, two years of no clatter. I've read that you can re-squish them into an oval with a vise, but they are cheap, so why bother? However... seeing that you tried swapping over the rocker and the nut, I'm at a loss.
jayoldschool is offline   Reply With Quote