Quote:
Originally Posted by HO455
Sorry for not being clear. Turning the photo may help. I put the test wire into the bolt hole and got it to come out under the headliner. (Next to those stupid crimp clamp connectors the PO used for trailer lights). That would be the green arrow.
I thought you wanted to get past the weld seam into the void area where the hinge bolts on. That is what all the red arrows were about.
|
No that's exactly what I need to know! I'm going to shift the wire for my light closer to the corner of the hatch and then redrill the hole to run up to the headliner. I picked up some spiral wire, so hopefully this won't look to bad. Thanks for checking into this!