[stsalvage]

Now my reply will take up some room but most of you will enjoy and some will Get it.There is one Bracket that works with all but one Chevy V8 engine witch is the 265 or the 260 .Never had one and never will.But all the rest from 1955--1995 this bracket works for power steering on all trucks.Ford dodge using the SM block chevy engine.This is the end all be all of easy brackets for the power steering pump.All others fall short.I've had all of them This one makes hoses easy to get to.This bracket let you adjust belt tension with ease.They are not cheep from 90.00 to 175.00 it will work on 283 up to the 400 small block.Now the pictures I have are from a 400 small block in a 1953 F100 and the 1965 3/4 ton with a 350.I have brackets that are for show only.Its just to show witch bracket you need.I do be leave this bracket works with headers.So here is your pic's.PS I have pulleys that show witch pulley is to be used with your power steering t6hey are single groves 1 deep one skinny skinny one goes on harmonic balancer then the skinny then the deep one grove that for alt and power steering.NO AC Both are on the driver side.Unless you have Headers then you find your own ALT brackets if you use Ram horns with the 2 screw in peaces on the manifold you can use the factory driver side bracket