[Danny23]

Quick question my breakes are lucking up trying to figure out the problem i already try a new MC and nothing and pedal is rock solid but when i bleed the MC everthing was really smooth no locking ..my question is do the output push rod short one i think (my is about 3-1/2 long) the tip need to be flush where the MC mounts or it need to be futher in about 1/2+/-? My output push rod is sticking out about 1/16 from the mounting surface when i mount the MC and get it ready to bolt it is stick out about 1/2.do the out put rod need to be futher in so is some play in between MC and hydroboist?...

if this is the case then my hydrobost is stock i did remove the input rod from thebreak p pedal to see if it move but nothing the tells me is not my breake pedal holding or not letting the output rod coming back to normal