The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

t300 · 06-15-2017, 11:14 PM

On a factory in-tank pump feed and return from 2001 silverado, can I use either of these fittings *on the sender*?

https://www.summitracing.com/int/par...4123/overview/

https://www.summitracing.com/int/parts/tnk-640853

I used the Russel part on my fuel rails and worked fine, and I liked the threaded retaining cap. Now, I'm going to ditch the inline Walbro and sink the 2001 pump into a rear mount tank. Will the Russel piece work right on the sender as well or do I have to use something like the Tanks Inc fitting?

06-15-2017, 11:14 PM	#1
t300 Registered User Join Date: Mar 2013 Location: Manitoba Posts: 184	silverado fuel pump/sender fitting On a factory in-tank pump feed and return from 2001 silverado, can I use either of these fittings on the sender? https://www.summitracing.com/int/par...4123/overview/ https://www.summitracing.com/int/parts/tnk-640853 I used the Russel part on my fuel rails and worked fine, and I liked the threaded retaining cap. Now, I'm going to ditch the inline Walbro and sink the 2001 pump into a rear mount tank. Will the Russel piece work right on the sender as well or do I have to use something like the Tanks Inc fitting?