|
i don't remember where the keyway points at TDC. i'm assuming it points at 12 oclock and if so then your pointer is in the 40 deg position. so if you have the 6.75 balancer then it should be marked for the 40 deg. if you have a larger diameter then your balancer isn't marked for the location of your pointer
__________________
'51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works
'05 1500 Crew Cab
RIP
'84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker
'80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's
|