The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

vin63 · 08-31-2017, 09:37 AM

I did that to weld up the dozens of holes previous owners had drilled through the floor for various things, including different seats. I also took the opportunity to seal, paint, and then finish the underside with some heat resistant acoustic coating.

I did set it on wood planks with a couple of 4x4s notched for the drip rail. I had a couple of friends help me with tilting, lifting, and setting the cab down.

08-31-2017, 09:37 AM	#2
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,262	Re: rolling cab on its side I did that to weld up the dozens of holes previous owners had drilled through the floor for various things, including different seats. I also took the opportunity to seal, paint, and then finish the underside with some heat resistant acoustic coating. I did set it on wood planks with a couple of 4x4s notched for the drip rail. I had a couple of friends help me with tilting, lifting, and setting the cab down. Attached Images __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes