I've done the lift. I have stock 1/2 tons on 1 1/2 lift plates on the front and 3" taller rear coils. I'm running 265/70/15's. This is what I have found so far. The front has almost no rebound left in it. I had to use shorter upper bump stops. Running over a pot hole hits real hard. I have plenty of compression, but the ride seems a bit harsh. The rear feels ok but I had to throw in an adjusable panhard bar to center the rear end. The angle of the bar is steep, about 20 degrees. The shocks on all 4 corners are just about topped out. I have the KYB 0 - 2" lift shocks on the front and a set of HD gas Monroe's on the rear. I'm also concerned about the rear drive shaft angle, looks steep to me. The truck looks great, I can run 32's even 33's on it, but it just seems the ride is off. It feels more like something out of the early 60's. I got about 3 inches total and the truck sits level. Here's a pic.
