The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Brad54 · 10-02-2017, 08:05 PM

If you've got it, and would like to part with it, let me know. It's a little thing/detail, but combined with the hard upper radiator hose from the factory, and the hard lower hose I'm going to fabricate, the factory tow hooks, factory grill guard, PTO winch, and proper skid plates I'll make to protect the engine, trans and T-case, that radiator tank guard will fit the truck well.
-Brad

10-02-2017, 08:05 PM	#5
Brad54 Registered User Join Date: Aug 2006 Location: Athens, Georgia Posts: 1,458	Re: Skid Plates for GMC? 4x4 or 2wd... If you've got it, and would like to part with it, let me know. It's a little thing/detail, but combined with the hard upper radiator hose from the factory, and the hard lower hose I'm going to fabricate, the factory tow hooks, factory grill guard, PTO winch, and proper skid plates I'll make to protect the engine, trans and T-case, that radiator tank guard will fit the truck well. -Brad __________________ '61 Suburban daily driver: off the road due to 180-pound 8-pt buck! '62 K-10 long-step project '61 C30 Camper, aka "Valdez" There's no cool like Old School