[demian5]

1. Beat on back of drum with BFH.
2. Try and rotate drum.
3. Repeat steps 1 and 2 until drum is removed.

Is there a indentation for the adjuster hole (same shape as the drum inspection holes) in the lower part of the backing plate?

I had to remove drums from an old British car once that were rusted on from years of sitting.

Use this as reference for where the adjuster is and drill a hole. You can force adjust the star without holding the lever with one hole drilled.

http://67-72chevytrucks.com/vboard/s...d.php?t=443837

http://67-72chevytrucks.com/vboard/s...d.php?t=660022