Quote:
Originally Posted by Dieselwrencher
That is looking very nice! It will be sweet as a 4x4!
|
Thank you, I agree it needs to be 4wd.
So here is the parts list...
3.73 Dana 60 rear and Dana 44 front, both with 4 pinion power loks.
Th400/np205.
The frame was set up with those parts and he was running a big block set forward about 3” which seems about right for firewall and heater box clearance with a big block. I will leave it that way since it came with a front driveshaft for that setup.
I picked up a 454 so will run that instead of the current 396.
It has 3-4” front lift springs and I will do a shackle flip on the rear to match the front lift.