[hihok9]

I'm sorry, my post may have been a bit confusing. The bolt hole measurements I need are the ones in the metal angle strips on the edges of the bed, just above the wooden floor and the bolt holes that should be the same on the metal bed strips that run the length of the wood floor. If you could take the measurements to the center of where your bolts are in those floor strips or angle strips that would allow me to have them made. (Mar-K does not have them on file because there were so few 9'ers made for our years 67-72) I have attached a pic of a 9' bed with the bolts in the strips I am referring to. A measure from the front of the bed to the bolt centers in a line would be great. Thanks in advance to helping me and other future 9 footers out!