The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Any Edelbrock Carburetor experts? Trying my hand at tuning

Hazieview · 11-05-2017, 07:27 PM

Awesome! Thanks again for the info! I'll tinker with the idle screws and see what happens. Then I'll pull a couple spark plugs. If they are bad I'll clean them and make some adjustments. I may try to move the accelerator linkage up to the top hole just to see what it does.

After I reinstall the plugs I'll pull them again. If I'm still too lean I'll either jet the Carb I have or get a 750. Thanks again for everyone's help!!!

11-05-2017, 07:27 PM	#17
Hazieview Building Dreams out of Dimes! Join Date: May 2005 Location: Bonham, Tx Posts: 892	Re: Any Edelbrock Carburetor experts? Trying my hand at tuning Awesome! Thanks again for the info! I'll tinker with the idle screws and see what happens. Then I'll pull a couple spark plugs. If they are bad I'll clean them and make some adjustments. I may try to move the accelerator linkage up to the top hole just to see what it does. After I reinstall the plugs I'll pull them again. If I'm still too lean I'll either jet the Carb I have or get a 750. Thanks again for everyone's help!!! __________________ 1981 Chevy short/wide. SB400 350th