View Single Post
Old 11-30-2017, 02:28 PM   #2
Grumpy old man
Senior Member
 
Grumpy old man's Avatar
 
Join Date: Dec 2013
Location: Gods country East,Tn
Posts: 8,545
Re: WTB - Single Barrel Rochester Carbs

Just a heads up ,You can't just bolt 3 stock carbs onto the manifold and expect it to work , You have to remove the choke plate and idle circuit on the front and rear carbs and add a progressive linkage , Only the center carb feeds the engine until about 20% throttle then the outer carbs start to kick in .check out Speedway motors and a uni-syn

For years customers have been either putting up with poor idling multiple carburetor set-ups or spending hundreds of dollars converting the secondary carburetors so they did not have to idle circuits


https://www.ebay.com/itm/Uni-Syn-Car...-/151717668361

https://www.speedwaymotors.com/Garag...sh,250690.html

Last edited by Grumpy old man; 11-30-2017 at 02:35 PM.
Grumpy old man is offline   Reply With Quote