|
Re: 67 C10 small window build
I had to do the following to get the truck to handle like stock with a 4" spring drop (shouldn't change anything once I'm at 6.5" with spindles, except maybe clearance on the inner wheel tubs):
-Completely cut out bump stop mount
-Caster mod (move lower control arm 1/2" to 3/4" forward)
-Readjust camber to between 0 and -1 degree
-Flip outer tie rod to mount from the bottom of the spindle to correct bump steer (this requires a tapered ream to redrill the spindle)
|