[budman911]

Originally Posted by hewittca

I had to do the following to get the truck to handle like stock with a 4" spring drop (shouldn't change anything once I'm at 6.5" with spindles, except maybe clearance on the inner wheel tubs):

-Completely cut out bump stop mount
-Caster mod (move lower control arm 1/2" to 3/4" forward)
-Readjust camber to between 0 and -1 degree
-Flip outer tie rod to mount from the bottom of the spindle to correct bump steer (this requires a tapered ream to redrill the spindle)

I would be curious to see if the droppped spindle corrects the need to flip the outter tie rod. If I remember correctly everything is pretty flat on my steering. No weird angles on the tie rods. Is there a "correct" angle? I've installed all the new steering components already. Now that you mention this, I have to go look. These all seem like straight forward mods. Thank you.