|
Re: Steering/Alignment Help Please
I removed the pitman arm last night and centered the steering box by counting turns. What I though would happen is, based on the fact that there are 4 key-ways in the output shaft and the pitman arm, the arm would have been misaligned and by moving it a quarter turn it would correct my issue. Well the output shaft doesn't even turn enough to accomplish that. With that idea debunked I began to wonder if the box being spaced over 3/8" is causing the issue. I don't think that to be true as it would require me to shorten the passenger tie-rod and lengthen the driver side more driving them farther from being equal. So... if I've evaluated my research correctly I'm left with taking everything back to "zero". By this I mean centering the center link (if that is the correct place to start), make the tie-rod ends equal, and possibly modify the frame to accept the steer box without spacers. What do y'all think?
|