Quote:
Originally Posted by GMCPaul
If you look at the wiper harness electrical wire and examine the wire wrap tape you should be able to un-tuck the end of the wire wrap tape and unwrap it from around harness to gain enough length to move it to the passenger side, then re-tuck wire wrap tape after removing excess. Then you don't have to add extensions to the existing wire. Done this on several. By the way tour going to a 69-72 dash if your moving wiper switch to passenger side. 67 & 68 both had the wiper switch on drivers side and both had choke opening on upper left passenger side.
Paul Jr. @ GMCPauls
|
Thanks Paul! The I mustve gotten my years mixed up but the new panel does have a single hole on the right and left so it's a 69-72.