Quote:
Originally Posted by Jens Jimmy
I am amazed at the amount of guys that jump right in to offer good info.
BW, mine looks like it could have the room to drill, but was leery, not knowing depth or whats behind it
|
It's a little scary when you drill it! IIRC, I had a second block that was drilled & I measured the depth. I also used two taps, a regular tap & a bottoming tap. The bottoming tap cuts threads almost all the way the bottom. (hence the name) If you don't want to buy a bottoming tap you can use your regular tap to start the threads & then cut the tapered end off to make a bottoming tap.