The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

aggiedave98 · 04-26-2004, 08:03 PM

I'm putting in a lift kit and plan on replacing the following:

ball joints
tie rod ends

should I also replace the idler arm and pittman arm while I'm in there?? It's only about an extra $70-$80 for both. I don't want to replace if it makes no sense, but since I'm in there it would be easy to.

btw, it's on an '89 suburban 2wd with 115k miles on it.

04-26-2004, 08:03 PM	#1
aggiedave98 Senior Member Join Date: Aug 2003 Location: Sugar Land, TX Posts: 1,007	replace pittman arm and idle arm?? I'm putting in a lift kit and plan on replacing the following: ball joints tie rod ends should I also replace the idler arm and pittman arm while I'm in there?? It's only about an extra $70-$80 for both. I don't want to replace if it makes no sense, but since I'm in there it would be easy to. btw, it's on an '89 suburban 2wd with 115k miles on it.