The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

52ratrod · 01-21-2018, 12:41 AM

Just had a question about my build and figured if I was ever to get a answer this would be the place. I'm using a 85 S10 and want to do the blazer big brake conversion. I'm going to use a drop spindle, Hub/bearing, rotor and calipers from the 98-05 blazer set up.

Question is the inlets on the calipers are in different positions. Can I still use the stock S10 flex hose set up? Will the line reach?

01-21-2018, 12:41 AM	#1
52ratrod Registered User Join Date: Apr 2015 Location: Cold lake alberta Posts: 31	Brake Question for S10 frame swap Just had a question about my build and figured if I was ever to get a answer this would be the place. I'm using a 85 S10 and want to do the blazer big brake conversion. I'm going to use a drop spindle, Hub/bearing, rotor and calipers from the 98-05 blazer set up. Question is the inlets on the calipers are in different positions. Can I still use the stock S10 flex hose set up? Will the line reach?