Quote:
Originally Posted by CG
Randy way back when I was going to put a 500 Caddy and 400 in my panel I had TCI build me a BPOP 400 with a short shaft. Is this something I could use to put this same set up in a 4x4? Engine and trans have been sitting in my shop for years.
|
Yes I do believe the BOP TH400 could be bolted up to the NP205 with these parts. The NP205 needs to have a large front bearing bore diameter, the stock NP205 from a TH350 is small bore front input bearing and the NP205 case would have to be bored to accept the larger input bearing.