The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

62chevy302 · 02-17-2018, 01:20 PM

Im having the same problem.
I have 78 c20 mounts and dirty dingo 73 up sliders. I have a pol transmission crossmember and my driveshaft yoke is almost touching it. Do i have my crossmember upside down?
Are my engine stands too high? My frame is sitting with the nose down and engine is still not level. Help

02-17-2018, 01:20 PM	#6
62chevy302 hillbilly Join Date: Apr 2007 Location: hampton,tn Posts: 459	Re: Engine height and output shaft angle Im having the same problem. I have 78 c20 mounts and dirty dingo 73 up sliders. I have a pol transmission crossmember and my driveshaft yoke is almost touching it. Do i have my crossmember upside down? Are my engine stands too high? My frame is sitting with the nose down and engine is still not level. Help Attached Images __________________ -1962 C-10