The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

4x4k30 · 03-01-2018, 03:53 PM

I swapped the motor mount around like it should be and still the right side pass. side will not bolt up the motor mounts it likes about a inch see pic see the yellow spot that's were it needs to be see the hole where the bolt goes into the frame mount.. the left side is bolted in like it should be. I am stumped

03-01-2018, 03:53 PM	#4
4x4k30 Registered User Join Date: Jun 2003 Location: ga Posts: 630	Re: ls engine mount problem I swapped the motor mount around like it should be and still the right side pass. side will not bolt up the motor mounts it likes about a inch see pic see the yellow spot that's were it needs to be see the hole where the bolt goes into the frame mount.. the left side is bolted in like it should be. I am stumped Attached Images __________________ 4x4k30 if trouble was money i would have plenty Last edited by 4x4k30; 03-01-2018 at 04:18 PM.