[4x4k30]

Originally Posted by 71cadc10

check the clamshell half that bolts to the block adapter...see if it's hitting the block right above the oil pan rail.
clearance the clamshell so it can bolt up flush to the block adapter.
that's where mine hit anyway.

are your Frame stands the SB style? I believe they need to be that type, but I"m not all that familiar with the 79

well its not hitting where you are talking about.. I measured the distance from the motor mount to the front of the transmission so that's where I set the motor mount bracket that mounts to the block so it should fit rite its the only way it will fit I used the second hole of the aluminum ls swap plated to bolt the factory 3 bolt bracket that goes over the clamshell rubber motor mount the engine set in like it is supposed to do but if you look at pic where the yellow spot is you can see that that's where the one of these motor mount bolts should be its in the left side fine I am stuck