The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

mobileortho · 03-05-2018, 02:37 PM

Thanks for the info. I've been back & forth on the tpi. The plan is to eventually go with a self tuning EFI like the Fast or Sniper units so that I won't have to worry about reprogramming the chip. The only place left to find a vortec tpi intake is Scoggins since Edelbrock discontinued theirs and when you do find one they're a bit pricey. One just sold on E-bay for $500 used. The only concern with the Scoggin intake is the flow. According to them, they were designed for the stock runners and I have the high flow Edelbrock.

03-05-2018, 02:37 PM	#3
mobileortho Registered User Join Date: Sep 2008 Location: Hampton, VA Posts: 912	Re: Head swap questions Thanks for the info. I've been back & forth on the tpi. The plan is to eventually go with a self tuning EFI like the Fast or Sniper units so that I won't have to worry about reprogramming the chip. The only place left to find a vortec tpi intake is Scoggins since Edelbrock discontinued theirs and when you do find one they're a bit pricey. One just sold on E-bay for $500 used. The only concern with the Scoggin intake is the flow. According to them, they were designed for the stock runners and I have the high flow Edelbrock. __________________ Robert C. 1950 3600 3600 re-do, shortening it up If it's true what they say, "You learn from your mistakes," I'm a Genius in the making.