The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

2001convertable · 03-05-2018, 08:04 PM

I ordered the bearing and brought the ham to the transmission shop to get rebuilt. Heres the problem...Will the u joint on the yoke of the dana 45 fit the 55t yoke. I don't care if I have to buy a new u joint but will the 55t match up to the drive shaft that the dana 45 was coupled to? The guy at the shop wants me to pull off the yoke on the dana 45 and bring it to him to install it on the 55t. If I knew if the joint was the same I would leave the yoke on the 55t and the yoke on the dana 45.Need help on this one big time.

03-05-2018, 08:04 PM	#15
2001convertable Registered User Join Date: Dec 2017 Location: wantagh new york Posts: 203	Re: Rear Axle bearing and Seals I ordered the bearing and brought the ham to the transmission shop to get rebuilt. Heres the problem...Will the u joint on the yoke of the dana 45 fit the 55t yoke. I don't care if I have to buy a new u joint but will the 55t match up to the drive shaft that the dana 45 was coupled to? The guy at the shop wants me to pull off the yoke on the dana 45 and bring it to him to install it on the 55t. If I knew if the joint was the same I would leave the yoke on the 55t and the yoke on the dana 45.Need help on this one big time.