Quote:
Originally Posted by Dan in Pasadena
The fuzzy C channel wrinkles at the upper rear corner depite clamping the heck out of them. Nothing a pro would do could change that. MAYBE cut “V’s” to make them conform to the curve of the door but I noticed that wasn’t done by the guys on YouTube that installed their own. Anyway, here are pic’s of the install. Anti-rattle strips or “whiskers” are not yet installed and it’s obvious they require extensive trimming to fit close-to-correctly.
|
looks good dan
the fuzzy c channel looked like someone bent them over their knee in my kit. i made a 1/4'' plywood template of the window and hammered the wrinkles flat
i used double sided tape to hold the anti-rattle strips in place. they needed 4 holes for micro-screws, i figured i'd chip the paint using a drill in that place. double sided tape to the rescue
anytime i used double sided tape i made sure to use the adhesive primer, once it's stuck it's there for good