Quote:
Originally Posted by Novicecarguy
So I was planning on replacing the coil plugs and wires reguardless
The old coil had its own ballast which was removed when I put the new one on. The melted wire happened prior to changing all that out.
The wire was run to the ignition from the starter cilinoid which another wire was on the same pole one the cilinoid which went to the coil all running fine after the wire was replaced. Not my issue.
Posted via Mobile Device
|
Your starter solenoid should have probably a purple wire on the small post closest to the engine and the wire running to the ignition connects to the other small post. One wire on each post not 2 wires on one post.