The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Sleipnir · 03-26-2018, 09:11 AM

Upgrading my three on the tree to a saginaw 4 speed I got for free out of a nova. I am already sourcing the drive shaft but I will also need a shifter for it too. I dont want to spend $500 on a hurst shifter because it's just going behind a 250 and a saginaw. I was thinking of using OER #6264024 as an alternative as it was made for that exact transmission. I'm curious though if it will be to short since I put in updated seats from a 2002 Tahoe. Or, Do you guys know of any other shifter that wont cost a ton of money and will work or would this be ok?

https://www.classicindustries.com/pr...s/6264024.html

03-26-2018, 09:11 AM	#1
Sleipnir Registered User Join Date: Oct 2017 Location: Seguin, TX Posts: 89	Shifter for 4 speed Saginaw Car Trans Upgrading my three on the tree to a saginaw 4 speed I got for free out of a nova. I am already sourcing the drive shaft but I will also need a shifter for it too. I dont want to spend $500 on a hurst shifter because it's just going behind a 250 and a saginaw. I was thinking of using OER #6264024 as an alternative as it was made for that exact transmission. I'm curious though if it will be to short since I put in updated seats from a 2002 Tahoe. Or, Do you guys know of any other shifter that wont cost a ton of money and will work or would this be ok? https://www.classicindustries.com/pr...s/6264024.html __________________ 67 C10 "Big Red"