Quote:
Originally Posted by focusedontheprize
Thanks MARTINSR. I only have the front cab mounts - I am missing the complete assembly for the rear cab mounts (shackles and mounts to frame and cab).
I am planning on cutting a set of new ones to make them solid mounting points for the frame. The measurements I am looking for is:
- Width of the mount that bolts to the cab
- Length of mount that bolts to the cab
- Height of mount (that bolts to the cab) to top of frame rail.
- Distance of center line of farthest hole to outside edge of the frame.
Thanks again for this MARTINSR. Hopefully it makes sense.
|
I have to tell you, I don't think these numbers are going to do any good for you. You may have it in your head but it depends how accurate I measure! And where, center to center, full length, that sort of thing.
I can take photos and do it so you can copy what is there, but it sounds like you plan on making them a little different. So if that is the case just knowing the distance from the frame to the bottom of the cab is all you need.
I will make the measurements you ask for but honestly, I don't see how you can use them if you are changing how they work anyway.
Brian