Re: LED Tail Light Question
Quote:
Originally Posted by jessemthompson
The torque converter lockup on the harness wires into the brake light switch on my LS Harness
|
The TCC switch is 12v on all the time and the brake switch opens the circuit. There is a separate circuit that is normally open and makes the connection for brake light function. There should be no interference since they are completely separate circuits. Now with that said if you have a swap using the cruise option...depending on how you have it wired you may need a resistor to make the cruise work. I have seen this before on 2 different swaps. There are always ways around these problems with relays. I have a wilwood MC with pressure brake switch. I have full LEDS and I trigger a relay to open for TCC , off of the brake light circuit with no issues.
__________________
The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride!
........................ ___
.........________//__{\_____
,,,,,,,/__(⊙)___//___/__(O)_/
@disciple2.rc 💪instagram💪
LED TAILS
|