Re: LT1 GenV swap
Drew up and cut out the transmission cross member pieces out. Didn't have the stock one, and if I did, probably still wouldn't use it lol. Waiting on the hole saw bit to arrive to finish it.
Similar design I used on the LS BMW
Plumbed the fuel system. Ran out of the push loc fittings, needed one more 45*, so a 90* was put on just to get it finished.
Proper 5bar fuel presssure regulator
Clint
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit
New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD
A poor man buy's it twice
finally got my domain name back, 87chevy.com.... site rework in progress
Last edited by 87chevy.com; 04-15-2018 at 08:34 PM.
|