The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Request for Picture

DransportGarage · 04-20-2018, 04:15 AM

I need a picture of a long side front bumper bracket as-installed. I have the brackets but I had filled the mounting hole when I boxed the frame.

...and yes, it's going to be interesting to get a nut on the inside of the boxed frame. After drilling the thru hole, I suppose I'll goop the nut up with J-B Weld, tape it to a stick, put it in place and use a bolt to hold it there until it nearly dries.

See how nice and pretty -- and non-functional I made it?

Thanks in advance,

04-20-2018, 04:15 AM	#1
DransportGarage Registered User Join Date: Feb 2010 Location: Lebanon, Ohio Posts: 1,359	Request for Picture - '55 2nd Series Front Bumper Bracket I need a picture of a long side front bumper bracket as-installed. I have the brackets but I had filled the mounting hole when I boxed the frame. ...and yes, it's going to be interesting to get a nut on the inside of the boxed frame. After drilling the thru hole, I suppose I'll goop the nut up with J-B Weld, tape it to a stick, put it in place and use a bolt to hold it there until it nearly dries. See how nice and pretty -- and non-functional I made it? Thanks in advance, Attached Images __________________ Bob "It won't take long and it won't cost much." '55 3100 (383/700R4)--'55 Belair Sedan (350/4-speed)--'64 'Vette Conv. (327/4-speed)--'68 GTO Conv. (462/4-speed)--'69 Cutlass Conv. (350/TH350)--'06 'Vette Conv. (LS2/6-speed) Bob's Retirement Build - My 55 TF Bob's 700R4 Build (how-to) Last edited by DransportGarage; 04-20-2018 at 04:23 AM.