The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**jweb** · 04-23-2018, 10:46 AM

It looks like you have this style of ignition, which is made for non foot start:
https://www.classicparts.com/1955-59...ctinfo/53-411/

I installed a similar ignition and EZ Wiring harness in my '51 yesterday with no problems. Here's the wiring I did:

Red=Bat
Purple= Sol
Orange= Acc
Brown=Ign
Pink=Ign

Also, any locksmith can re-key the ignition to accept the original key. Just take it to them before you install it in the truck.

04-23-2018, 10:46 AM	#2
jweb Senior Member Join Date: Apr 2010 Location: Oregon Posts: 1,238	Re: EZ Wire a 59 Chevy 3100 IGN Switch? It looks like you have this style of ignition, which is made for non foot start: https://www.classicparts.com/1955-59...ctinfo/53-411/ I installed a similar ignition and EZ Wiring harness in my '51 yesterday with no problems. Here's the wiring I did: Red=Bat Purple= Sol Orange= Acc Brown=Ign Pink=Ign Also, any locksmith can re-key the ignition to accept the original key. Just take it to them before you install it in the truck. __________________ 1951 Truck, LS1/4L60 1964 Suburban, current project