[jeff_wilson70]

Got it out of the truck. I was pleasantly surprised that even though the heater components under the hood were shot, the whole switch and wiring stuff was in really great shape. The PO got paint all over all the knobs on the dash. I was able to get that off of the knob and the bezel. The cable moves freely. I was also able to pull both wiring harnesses off. The one that goes to the resistor on the back of the inside unit (which I will also send Its in the pics below) including the orange wire that goes thru the grommet on the firewall and connects to the fan housing....and the brown wire that goes from the switch to the blade on the side of the fuse panel.

Since dealing with paypal and all that is a real pain (to cover shipping), lets just do this....Make a donation to the wounded warrior project, PM me your address and I'll get all this stuff shipped out tomorrow or Wednesday.