|
Re: Fuel tank relocation fuel line
Quote:
Originally Posted by SeanB242
I used the stock fuel line in the frame rail. Just ran a piece of rubber on each end. Not ideal but it’s all I had. Will probably redo it. You can get fittings and some braided line from summit. What type of tank are you using? If you used a Blazer tank then you could get a factory Blazer line that would make up most of the run from front to back.
|
Except that the K/5 is 104'' [wheel-to-wheel centers], a shortbed is 115'' and a longbed is 125''.
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not.
|